Toby Chui cffc93780d updated 4x5 builds před 1 rokem
..
README.md cffc93780d updated 4x5 builds před 1 rokem
base.ipt cffc93780d updated 4x5 builds před 1 rokem
base.stl cffc93780d updated 4x5 builds před 1 rokem
legs 1 rev2.stl cffc93780d updated 4x5 builds před 1 rokem
legs v1 rev2.ipt cffc93780d updated 4x5 builds před 1 rokem
switch_stabalizer.ipt cffc93780d updated 4x5 builds před 1 rokem
switch_stabalizer.stl cffc93780d updated 4x5 builds před 1 rokem

README.md

To assemble the case, you will need 4 x M2x5 screws

If you are using the PCB in a standard numpad config, you will also need to print 3 stablizer which can be screw in place to the PCB using a total of 6 M3 x 5 screws.

After the 3D printed base is assembled, you will need another 4 (or 3) M2 x5 screws to fix the PCB onto the base.