Toby Chui
cffc93780d
updated 4x5 builds
|
1 年之前 | |
|---|---|---|
| .. | ||
| README.md | 1 年之前 | |
| base.ipt | 1 年之前 | |
| base.stl | 1 年之前 | |
| legs 1 rev2.stl | 1 年之前 | |
| legs v1 rev2.ipt | 1 年之前 | |
| switch_stabalizer.ipt | 1 年之前 | |
| switch_stabalizer.stl | 1 年之前 | |
README.md
To assemble the case, you will need 4 x M2x5 screws
If you are using the PCB in a standard numpad config, you will also need to print 3 stablizer which can be screw in place to the PCB using a total of 6 M3 x 5 screws.
After the 3D printed base is assembled, you will need another 4 (or 3) M2 x5 screws to fix the PCB onto the base.