package remdeshid

import (
	"fmt"
	"log"
	"time"

	"github.com/tarm/serial"
)

func NewHIDController(config *Config) *Controller {
	// Initialize the HID state with default values
	defaultHidState := HIDState{
		Modkey:          0x00,
		KeyboardButtons: [6]uint8{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
		Leds:            0x00,
		MouseButtons:    0x00, // No mouse buttons pressed
		MouseX:          0,
		MouseY:          0,
	}

	return &Controller{
		Config:          config,
		serialRunning:   false,
		hidState:        defaultHidState,
		writeQueue:      make(chan []byte, 32),
		incomgDataQueue: make(chan []byte, 1024),
	}
}

// Connect opens the serial port and starts reading from it
func (c *Controller) Connect() error {
	// Open the serial port
	config := &serial.Config{
		Name:   c.Config.PortName,
		Baud:   c.Config.BaudRate,
		Size:   8,
		Parity: serial.ParityNone,
	}

	port, err := serial.OpenPort(config)
	if err != nil {
		return err
	}

	c.serialPort = port
	//Start reading from the serial port
	go func() {
		buf := make([]byte, 1024)
		for {
			n, err := port.Read(buf)
			if err != nil {
				log.Println(err.Error())
				return
			}
			if n > 0 {
				c.incomgDataQueue <- buf[:n]
				//fmt.Print("Received bytes: ")
				//for i := 0; i < n; i++ {
				//	fmt.Printf("0x%02X ", buf[i])
				//}
				fmt.Println()
			}
		}
	}()

	//Create a loop to write to the serial port
	c.serialRunning = true
	go func() {
		for {
			data := <-c.writeQueue
			_, err := port.Write(data)
			if err != nil {
				log.Println(err.Error())
				return
			}
		}
	}()

	//Send over an opr queue reset signal
	err = c.Send([]byte{0xFF})
	if err != nil {
		return err
	}

	return nil
}

func (c *Controller) Send(data []byte) error {
	if !c.serialRunning {
		return fmt.Errorf("serial port is not running")
	}
	select {
	case c.writeQueue <- data:
		return nil
	case <-time.After(30 * time.Millisecond):
		return fmt.Errorf("timeout waiting to send data")
	}
}

func (c *Controller) ClearReadQueue() {
	// Clear the incoming data queue
	for len(c.incomgDataQueue) > 0 {
		<-c.incomgDataQueue
	}
}

func (c *Controller) WaitForReply(cmdByte byte) ([]byte, error) {
	// Wait for a reply from the device
	succReplyByte := cmdByte | 0x80
	errorReplyByte := cmdByte | 0xC0
	timeout := make(chan bool, 1)
	go func() {
		// Timeout after 500ms
		time.Sleep(500 * time.Millisecond)
		timeout <- true
	}()

	var reply []byte
	for {
		select {
		case data := <-c.incomgDataQueue:
			reply = append(reply, data...)
			// Check if we have received enough bytes for a complete packet
			if len(reply) >= 7 {
				// Validate header
				if reply[0] == 0x57 && reply[1] == 0xAB {
					// Extract fields
					//address := reply[2]
					replyByte := reply[3]
					dataLength := reply[4]
					expectedLength := 5 + int(dataLength) + 1 // Header + address + replyByte + dataLength + data + checksum

					// Check if the full packet is received
					if len(reply) >= expectedLength {
						data := reply[5 : 5+dataLength]
						checksum := reply[5+dataLength]

						// Calculate checksum
						sum := byte(0)
						for _, b := range reply[:5+dataLength] {
							sum += b
						}

						// Validate checksum
						if sum == checksum {
							// Check reply byte for success or error
							switch replyByte {
							case succReplyByte:
								return data, nil
							case errorReplyByte:
								return nil, fmt.Errorf("device returned error reply")
							}
						} else {
							return nil, fmt.Errorf("checksum validation failed")
						}
					}
				} else {
					// Invalid header, discard data
					reply = nil
				}
			}
		case <-timeout:
			return nil, fmt.Errorf("timeout waiting for reply")
		}
	}
}

func (c *Controller) Close() {
	if c.serialPort != nil {
		c.serialPort.Close()
	}
}