HomeDynamicv3/hardware/hds_5-way-switch/firmware/5xswitches/5xswitches.ino

/*

      Home Dynamic System v3

      5-way wall switches
      Hardware reference design

      Author: tobychui
*/

#include <WiFiManager.h>
#include <ArduinoJson.h>
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <ESP8266WebServer.h>
#include <ESP8266HTTPClient.h>
#include "TaskScheduler.h"
#include "LittleFS.h"

// Device Configs, required by HDSv3
#define DEVICE_NAME "hds_5xSwitch"    //The name of this IoT device
#define SETUP_WIFI_NAME "hds_5xSwitch"
#define LISTENING_PORT 12110        //The port where this IoT device listen
#define DEBUG true
String deviceUUID = ""; //Device UUID is generated base on devcie MAC address

// Output shift register pints
const int SRCLK_PIN = D7;
const int RCLK_PIN = D1;
const int SER_PIN = D2;

// Input button pins (The last one must be A0 pin)
bool buttonStates[5] = {false, false, false, false, false};
const int buttonPins[] = {D4, D6, D5, D0, A0};
const int numButtons = 5;

//Modify these two control other devices
#define TARGET_DEVICE "hds_4xRelay_48-3F-DA-67-3D-BD.local"
IPAddress target_ip;
uint16_t target_port = 0;


// Status led
#define BLINK_DURATION 100
bool blueLED = false;
bool yellowLED = false;
bool redLED = false;

//Runtimes
Scheduler deviceScheduler;

//WiFi Related
WiFiManager wifiManager;
ESP8266WebServer server(LISTENING_PORT);

void setup() {
  //Enable debug Serial
  Serial.begin(115200);

  //Load device UUID
  deviceUUID = WiFi.macAddress();
  deviceUUID.replace(":", "-");

  // Initialize shift register pins
  pinMode(SRCLK_PIN, OUTPUT);
  pinMode(RCLK_PIN, OUTPUT);
  pinMode(SER_PIN, OUTPUT);

  // Initialize button pins
  for (int i = 0; i < numButtons; ++i) {
    pinMode(buttonPins[i], INPUT_PULLUP);
  }

  //Reset the state of all LEDs
  resetOutputs();

  //Start HDSv3 services
  initHds3Services();

  //Start discovering the target devices ip
  resolveTargetRelayIP();
}

void loop() {
  //Handle web-ish things
  server.handleClient();
  MDNS.update();
  //Update and Execute Button Events
  updateButtonStates();
  updateShiftRegister();

  //Show yellow warning LED if target not found
  if (target_port == 0){
    yellowLED = true;
  }else{
    yellowLED = false;
  }
}