Cute-On-Off-Robot/firmware/cute_useless_robot/logics.ino

/*
  Main logic handlers

  This file store the behavior of the robot
  when the switch is pressed

*/

/* Pushing Sequences */
void executePushAnimationSequence(int seqID) {
  if (seqID < 3) {
    //Default push back
    setAnimationCode('a');
    delay(4000);
    pushSwitchDelayed(1000, 1000);
    if (seqID == 2){
      //Do not turn off display
      return;
    }
  } else if (seqID < 4) {
    //Hesitation push back
    setAnimationCode('a');
    delay(4000);
    pushWithHesitation();
    return;
  } else if (seqID < 5) {
    //Hesitation push and walk back
    setAnimationCode('a');
    delay(4000);
    servoCoverPusher.write(90);
    delay(1000);
    servoSwitchPusher.write(90 + SERVO_ALIGNMENT_OFFSET);
    delay(2000);
    backward(100);
    delay(1000);
    servoSwitchPusher.write(130 + SERVO_ALIGNMENT_OFFSET);
    delay(1000);
    servoCoverPusher.write(0);
    servoSwitchPusher.write(0);
    return;
  } else if (seqID < 8) {
    //Annoy push back
    setAnimationCode('b');
    delay(2000);
    pushSwitchDelayed(300, 300);
    delay(3000);
    //Do not return to clear-frames when annoyed
    return;
  } else if (seqID < 10) {
    //Faster annoyed push back
    setAnimationCode('b');
    delay(500);
    pushSwitchNow();
    delay(1000);
    //Do not return to clear-frames when annoyed
    return;
  } else if (seqID < 11) {
    //Shake its head and push back
    setAnimationCode('f');
    delay(500);
    rotateClockwise(50);
    rotateAntiClockwise(100);
    rotateClockwise(100);
    rotateAntiClockwise(50);
    pushSwitchDelayed(1000, 300);
    delay(2000);
    setAnimationCode('g');
    return;
  } else {
    //fallback default push back
    setAnimationCode('a');
    delay(4000);
    pushSwitchDelayed(1000, 1000);
  }
  clearFrame();
  delay(3000);
}

//Debug sequence to test all movement functions
void runDebugSequence() {
  //setAnimationCode('a');
  //delay(10000);

  //Stepper test
  forward(50);
  delay(3000);
  backward(50);
  delay(3000);
  rotateAntiClockwise(100);
  delay(1000);
  //rotate backward
  rotateClockwise(100);
  delay(3000);

  //setAnimationCode('j');
  //delay(10000);
  //Servo test
  servoCoverPusher.write(90 + SERVO_ALIGNMENT_OFFSET);
  delay(1000);
  servoSwitchPusher.write(130 + SERVO_ALIGNMENT_OFFSET);
  delay(1000);
  servoCoverPusher.write(0);
  servoSwitchPusher.write(0);
  delay(3000);

  //Switch test
  bool switchPushed = getSwitchState();
  if (switchPushed) {
    Serial.println("Switch pushed");
  } else {
    Serial.println("Switch idle");
  }
}